Instructions Project (Minecraft)

This is a project where I had to instruct the class on making something. I chose a device from Minecraft that I made myself. Unfortunately, it seemed that the original document did not translate well into this blog, so the spacing with the pictures is a little off.

Connor Nelson

William Montesano

Eng365

Introduction

            Welcome. You have been selected to participate in this project as our guinea pig. You will be attempting to recreate a jump pad I built in the game Minecraft. Do not worry, while preferred, experience playing Minecraft is not required, and you have been provided with all of the materials necessary for the project. For those unfamiliar with the controls; WASD controls movement, and the mouse controls where you are looking.

What you will need

            Minecraft by Mojang

            (In game) Piston(1), Slime block(1), Button(1), A creative world

1.      Getting into the world: To begin click on the Singleplayer button. Then double click on ENG 365.

2.      Dig the hole: Create a hole in the ground, by left clicking the spot, three (3) spaces in front of the pillar in front of you.

3.      Selecting the piston: Select the piston in your inventory. It is in the second slot and can be selected by pressing the 2 key.

4.      Place the piston: Place in the hole you just created by moving the crosshairs over the bottom of the hole and press the right key. If correctly done the top of the piston (the wooden part) will be the only visible part.

5.      Placing the slime block: Now select the slime block in the third slot of your inventory and place one on top of the piston. You will use similar steps to how you selected and placed the piston.

6.      Setting up the button: Finally place the button on the ground block adjacent to the slime block between it and the pillar.

This should complete the jump pad. To test you can hop onto the slime block and press the button. Go ahead and try to get onto the platform
.